Version 7.0 61 Mediant 3000
User's Manual 7. Web-Based Management
7 Web-Based Management
The device provides an embedded Web server (hereafter referred to as Web interface),
supporting fault management, configuration, accounting, performance, and security
(FCAPS), including the following:
Full configuration
Software and configuration upgrades
Loading Auxiliary files, for example, the Call Progress Tones file
Real-time, online monitoring of the device, including display of alarms and their
severity
Performance monitoring of voice calls and various traffic parameters
The Web interface provides a user-friendly, graphical user interface (GUI), which can be
accessed using any standard Web browser (e.g., Microsoft™ Internet Explorer).
Access to the Web interface is controlled by various security mechanisms such as login
user name and password, read-write privileges, and limiting access to specific IP
addresses.
Notes:
• The Web interface allows you to configure most of the device's settings. However,
additional configuration parameters may exist that are not available in the Web
interface and which can only be configured using other management tools.
• Some Web interface pages and/or parameters are available only for certain
hardware configurations or software features. The software features are
determined by the installed Software License Key (see ''Software License Key'' on
page 697).
7.1 Getting Acquainted with the Web Interface
This section provides a description of the Web interface.
7.1.1 Computer Requirements
The client computer requires the following to work with the Web interface of the device:
A network connection to the device
One of the following Web browsers:
• Microsoft™ Internet Explorer™ (Version 11.0.13 and later)
• Mozilla Firefox
®
(Versions 5 through 9.0)
Recommended screen resolutions: 1024 x 768 pixels, or 1280 x 1024 pixels
Note: Your Web browser must be JavaScript-enabled to access the Web interface.
To Next Page
Loading...
Need help?
General
