User's Manual 642 Document #: LTRT-89730
Mediant 3000
35.4 Using Dial Plan Tags for Outbound Manipulation
You can use Dial Plan tags to denote source and/or destination URI user names in
Outbound Manipulation rules in the IP-to-IP Outbound Manipulation table.
The following procedure describes how to configure Outbound Manipulation based on tags.
 To configure Outbound Manipulation based on tags:
1. In the Dial Plan table configure a Dial Plan (see 'Configuring Dial Plans' on page 633).
2. In the IP Group or SRD associated with the calls for which you want to use tag-based
routing, assign the Dial Plan that you configured in Step 1.
• IP Group table: 'Dial Plan' parameter (IPGroup_SBCDialPlanName) - see
Configuring IP Groups
• SRD table: 'Dial Plan' parameter (SRD_SBCDialPlanName) - see Configuring
SRDs
3. In the Outbound Manipulations table (see Configuring IP-to-IP Outbound
Manipulations), configure a rule with the required manipulation and whose matching
characteristics include the tag(s) that you configured in your Dial Plan in Step 1. The
tags are assigned using the following parameters:
• 'Source Tags' parameter (IPOutboundManipulation_SrcTags): tag denoting the
calling users
• 'Destination Tags' parameter (IPOutboundManipulation_DestTags): tag denoting
the called users
To Next Page
Loading...
Need help?
General
