Version 7.0 875 Mediant 3000
User's Manual 58. Configuration Parameters Reference
Parameter Description
IDS Rule Table
[IDSRule]
Defines rules for IDS Policies.
The format of the ini file parameter is:
[ IDSRule ]
FORMAT IDSRule_Index = IDSRule_Policy, IDSRule_RuleID,
IDSRule_Reason, IDSRule_ThresholdScope,
IDSRule_ThresholdWindow, IDSRule_MinorAlarmThreshold,
IDSRule_MajorAlarmThreshold, IDSRule_CriticalAlarmThreshold,
IDSRule_DenyThreshold, IDSRule_DenyPeriod;
[ \IDSRule ]
For a detailed description of the table, see ''Configuring IDS Policies'' on
page 179.
IDS Match Table
IDS Match Table
[IDSMatch]
Defines target rules per IDS Policy.
The format of the ini file parameter is:
[ IDSMatch ]
FORMAT IDSMatch_Index = IDSMatch_SIPInterface,
IDSMatch_ProxySet, IDSMatch_Subnet, IDSMatch_Policy;
[ \IDSMatch ]
For a detailed description of the table, see ''Assigning IDS Policies'' on
page 183.
58.4.7 IPSec Parameters
The Internet Protocol security (IPSec) parameters are described in the table below.
Table 58-30: IPSec Parameters
Parameter Description
IPSec Parameters
Enable IP Security
[EnableIPSec]
Enables IPSec on the device.
ï‚§ [0] Disable (default)
ï‚§ [1] Enable
Note: For the parameter to take effect, a device reset is required.
IKE Certificate Ext
Validate
[IKEcertificateExtValidate
]
Enables the validation of the extensions (keyUsage and
extentedKeyUsage) of peer certificates. This validation ensures that the
signing CA is authorized to sign certificates and that the end-entity
certificate is authorized to negotiate a secure IPSec connection.
ï‚§ [0] Disable (default)
ï‚§ [1] Enable
IPSec Associations Table
IP Security Associations
Table
[IPSecSATable]
The table defines the IPSec SA table. This table allows you to configure
the Internet Key Exchange (IKE) and IP Security (IPSec) protocols. The
format of the ini file table parameter is:
[ IPsecSATable ]
FORMAT IPsecSATable_Index =
IPsecSATable_RemoteEndpointAddressOrName,
IPsecSATable_AuthenticationMethod, IPsecSATable_SharedKey,