User's Manual 118 Document #: LTRT-89730
Mediant 3000
10.2 Configuring an ini File
There are different methods that you can use for configuring the ini file before you load it to
the device.
Modifying the device's current ini file. This method is recommended if you mainly need
to change the settings of parameters that you have previously configured.
1. Save the device's current configuration as an ini file on your computer, using the
Web interface (see ''Saving Configuration'' on page 672).
2. Open the file using a text file editor, and then modify the ini file as required.
3. Save and close the file.
4. Load the file to the device.
Creating a new ini file that includes only updated configuration:
1. Open a text file editor such as Notepad.
2. Add only the required parameters and their settings.
3. Save the file with the ini file extension name (e.g., myconfiguration.ini).
4. Load the file to the device.
For loading the ini file to the device, see ''Loading an ini File to the Device'' on page 119.
Notes:
• If you save an ini file from the device and a table row is configured with invalid
values, the ini file displays the row prefixed with an exclamation mark (!), for
example:
!CpMediaRealm 1 = "ITSP", "Voice", "", 60210, 2, 6030, 0, "",
"";
• To restore the device to default settings through the ini file, see ''Restoring Factory
Defaults'' on page 729.
To Next Page
Loading...
Need help?
General
