EasyManuals Logo
Home>AudioCodes>Gateway>Mediant 3000

AudioCodes Mediant 3000 User Manual

AudioCodes Mediant 3000
1070 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #62 background imageLoading...
Page #62 background image
User's Manual 62 Document #: LTRT-89730
Mediant 3000
7.1.2 Accessing the Web Interface
The following procedure describes how to access the Web interface.
 To access the Web interface:
1. Open a standard Web browser (see ''Computer Requirements'' on page 61).
2. In the Web browser, specify the OAMP IP address of the device (e.g.,
http://10.1.10.10); the Web interface's Login window appears, as shown below:
Figure 7-1: Web Login Screen
3. In the 'Username' and 'Password' fields, enter the case-sensitive, user name and
password respectively.
4. Click Login; the Web interface is accessed, displaying the Home page. For a detailed
description of the Home page, see ''Viewing the Home Page'' on page 79.
Notes:
• The default login username and password is "Admin". To change the login
credentials, see ''Configuring the Web User Accounts'' on page 82.
• If you want the Web browser to remember your password, select the 'Remember
Me' check box and then agree to the browser's prompt (depending on your
browser) to save the password for future logins. On your next login attempt, simply
press the Tab or Enter keys to auto-fill the 'Username' and 'Password' fields, and
then click Login.
• Depending on your Web browser's settings, a security warning box may be
displayed. The reason for this is that the device's certificate is not trusted by your
PC. The browser may allow you to install the certificate, thus skipping the warning
box the next time you connect to the device. If you are using Windows Internet
Explorer, click View Certificate, and then Install Certificate. The browser also
warns you if the host name used in the URL is not identical to the one listed in the
certificate. To resolve this, add the IP address and host name (ACL_nnnnnn,
where nnnnnn is the serial number of the device) to your hosts file, located at
/etc/hosts on UNIX or C:\Windows\System32\Drivers\ETC\hosts on Windows; then
use the host name in the URL (e.g., https://ACL_280152). Below is an example of
a host file:
127.0.0.1 localhost
10.31.4.47 ACL_280152

Table of Contents

Other manuals for AudioCodes Mediant 3000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes Mediant 3000 and is the answer not in the manual?

AudioCodes Mediant 3000 Specifications

General IconGeneral
BrandAudioCodes
ModelMediant 3000
CategoryGateway
LanguageEnglish

Related product manuals