AudioCodes Mediant 3000 User Manual

Version 7.0 951 Mediant 3000
User's Manual 58. Configuration Parameters Reference
Parameter Description
External Call Digit Pattern
[DigitPatternExternalCall]
Defines the digit pattern used by the PBX to indicate an external call.
The valid range is a 120-character string.
Disconnect Call Digit
Pattern
[TelDisconnectCode]
Defines a digit pattern that when received from the Tel side, indicates
the device to disconnect the call.
The valid range is a 25-character string.
Digit To Ignore Digit
Pattern
[DigitPatternDigitToIgnore]
Defines a digit pattern that if received as Src (S) or Redirect (R)
numbers is ignored and not added to that number.
The valid range is a 25-character string.
58.10.5 Supplementary Services Parameters
This subsection describes the device's supplementary telephony services parameters.
58.10.5.1 Caller ID Parameters
The caller ID parameters are described in the table below.
Table 58-45: Caller ID Parameters
Parameter Description
Enable Caller ID
[EnableCallerID]
Global parameter that enables Caller ID.
 [0] Disable (default)
 [1] Enable =

CAS: The device detects the Caller ID signal received from the
Tel and sends it to the IP in the SIP INVITE message (as the
'Display' element).
Asserted Identity Mode
[AssertedIdMode]
Determines whether the SIP header P-Asserted-Identity or P-Preferred-
Identity is added to the sent INVITE, 200 OK, or UPDATE request for
Caller ID (or privacy). These headers are used to present the calling
party's Caller ID, which is composed of a Calling Number and a Calling
Name (optional).
 [0] Disabled = (Default) P-Asserted-Identity and P-Preferred-Identity
headers are not added.
 [1] Add P-Asserted-Identity
 [2] Add P-Preferred-Identity
The used header also depends on the calling Privacy (allowed or
restricted). These headers are used together with the Privacy header. If
Caller ID is restricted (i.e., P-Asserted-Identity is not sent), the Privacy
header includes the value 'id' ('Privacy: id'). Otherwise, for allowed
Caller ID, 'Privacy: none' is used. If Caller ID is restricted (received from
Tel), the From header is set to <anonymous@anonymous.invalid>.
The 200 OK response can contain the connected party CallerID -
Connected Number and Connected Name. For example, if the call is
answered by the device, the 200 OK response includes the P-Asserted-
Identity with Caller ID. The device interworks (in some ISDN variants),

AudioCodes Mediant 3000 Specifications

General

Brand	AudioCodes
Model	Mediant 3000
Category	Gateway
Language	English