EasyManuals Logo
Home>AudioCodes>Gateway>Mediant 3000

AudioCodes Mediant 3000 User Manual

AudioCodes Mediant 3000
1070 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #891 background imageLoading...
Page #891 background image
Version 7.0 891 Mediant 3000
User's Manual 58. Configuration Parameters Reference
Parameter Description
[TCPKeepAliveTime] Defines the interval (in sec) between the last data packet sent and the
first keep-alive probe to send.
The valid value is 10 to 65,000. The default is 60.
Notes:
ï‚§ Simple ACKs such as keepalives are not considered data packets.
ï‚§ TCP keepalive is enabled per SIP Interface in the SIP Interface table.
[TCPKeepAliveInterval] Defines the interval (in sec) between consecutive keep-alive probes,
regardless of what the connection has exchanged in the meantime.
The valid value is 10 to 65,000. The default is 10.
Note: TCP keepalive is enabled per SIP Interface in the SIP Interface
table.
[TCPKeepAliveRetry] Defines the number of unacknowledged keep-alive probes to send
before considering the connection down.
The valid value is 1 to 100. The default is 5.
Note: TCP keepalive is enabled per SIP Interface in the SIP Interface
table.
NAT Translation Table
NAT Translation Table
[NATTranslation]
Defines NAT rules for translating source IP addresses per VoIP interface
(SIP control and RTP media traffic) into NAT IP addresses.
The format of the ini file table parameter is as follows:
[ NATTranslation ]
FORMAT NATTranslation_Index =
NATTranslation_SrcIPInterfaceName,
NATTranslation_TargetIPAddress, NATTranslation_SourceStartPort,
NATTranslation_SourceEndPort, NATTranslation_TargetStartPort,
NATTranslation_TargetEndPort;
[ \NATTranslation ]
For a detailed description of the table, see ''Configuring NAT Translation
per IP Interface'' on page 167.
Media Realm Table
Media Realm Table
[CpMediaRealm]
Defines Media Realms.
The format of the ini file table parameter is as follows:
[ CpMediaRealm ]
FORMAT CpMediaRealm_Index = CpMediaRealm_MediaRealmName,
CpMediaRealm_IPv4IF, CpMediaRealm_IPv6IF,
CpMediaRealm_PortRangeStart, CpMediaRealm_MediaSessionLeg,
CpMediaRealm_PortRangeEnd, CpMediaRealm_IsDefault,
CpMediaRealm_QoeProfile, CpMediaRealm_BWProfile;
[ \CpMediaRealm ]
For a detailed description of the table, see ''Configuring Media Realms''
on page 319.
Remote Media Subnet Table

Table of Contents

Other manuals for AudioCodes Mediant 3000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes Mediant 3000 and is the answer not in the manual?

AudioCodes Mediant 3000 Specifications

General IconGeneral
BrandAudioCodes
ModelMediant 3000
CategoryGateway
LanguageEnglish

Related product manuals