Version 7.0 91 Mediant 3000
User's Manual 7. Web-Based Management
2. Web user sessions:
a. 'Password Change Interval': Duration of the validity of Web login passwords.
When the duration expires, the Web user must change the password in order to
log in again.
b. 'User Inactivity Timeout': If the user has not logged into the Web interface within
this defined duration, the status of the user becomes inactive and the user can no
longer access the Web interface. The user can only log in to the Web interface if
its status is changed (to "New" or "Valid") by an Administrator or a Master user.
c. 'Session Timeout': Duration of Web inactivity (i.e., no actions are performed in the
Web interface) of a logged-in user, after which the Web session expires and the
user is automatically logged off the Web interface and needs to log in again to
continue the session. You can also configure the functionality per user in the Web
Users table (see Advanced User Accounts Configuration on page 85), which
overrides this global setting.
3. Web user access:
d. 'Deny Authentication Timer': Interval (in seconds) that the user needs to wait
before the user can attempt to log in from the same IP address after reaching the
maximum number of failed login attempts (see next step).
e. 'Deny Access On Fail Count': Number of failed login attempts after which the user
is prevented access to the device for a user-defined duration (previous step).
4. Click Submit.
For a detailed description of the above parameters, see ''Web Parameters'' on page 831.
To Next Page
Loading...
Need help?
General
