GE VOLUSON
i / VOLUSON
e
D
IRECTION KTI106052, REVISION 10 SERVICE MANUAL
Chapter 3 - Setup Instructions 3-91
3-7-5 Adjustment of Printer Settings
1.) After system restart, press the UTILITIES key on the alphanumeric keyboard and then select the
SYSTEM
item from the menu area on the left side of the screen.
2.) Select the
SERVICE page. The “password window” appears automatically.
3.) Enter the password SHE and click the ACCEPT
button.
4.) Click on the PRINTER
button.
5.) Select the desired printer from the pull-down menu and click the EDIT SETTINGS
button.
6.) Confirm the warning message with the YES
button. The “Printer Properties” appear.
To adjust the UP-D897 Printer see: Section 3-7-5-1 "UP-D897 - Printer Settings" .
To adjust the UP-D23MD Printer see: Section 3-7-5-2 "UP-D23MD/UP-D25MD - Printer Settings" .
To adjust the Mitsubishi Printer see: Section 3-7-5-3 "Mitsubishi Printer Settings"
To adjust the Bluetooth Printer see: Section 3-7-5-4 "Bluetooth Deskjet - Printer Settings"
Figure 3-113 Select the desired printer
!! WARNING:
After each printer installation, the leakage currents have to be measured
acc. IEC 60601-1 resp. UL 60601-1 (see: Section 10-7-2 on page 10-13).
select the desired printer
from the pull-down menu
To Next Page
Loading...
Need help?
General
