GE VOLUSON
i / VOLUSON
e
D
IRECTION KTI106052, REVISION 10 SERVICE MANUAL
4-28 Section 4-5 - Backup and Restore Database, Preset Configurations and Images
Section 4-5
Backup and Restore Database, Preset Configurations and Images
1.) Press the UTILITIES key on the keyboard. The menu area changes to the Utilities menu.
2.) Select the SYSTEM
item from the menu area to activate the setup desktop screen.
3.) Select the
BACKUP page.
The “Backup” page is subdivided in two main groups:
A.) User Settings Only
• Section 4-5-1 "Save User Settings Only (Application Settings)" on page 4-29
• Section 4-5-2 "Load User Settings Only (Application Settings)" on page 4-30
B.) Full Backup
• Section 4-5-3 "Save Full Backup (Presets, Configurations & Application Settings)" on page 4-32
• Section 4-5-4 "Load Full Backup (Presets, Configurations & Application Settings)" on page 4-34
• Section 4-5-5 "Delete Full Backup (Presets, Configurations & Application Settings)" on page 4-36
The User Settings and/or Full Backup can be saved to the following destinations:
• D: partition of internal hard disk
• DVD/CD+(R)W
• Mapped Network Drive Z:
see: Section 3-12-3 "Map Network Drive" on page 3-118
• Any other drive connected to the system (e.g.; USB Flash Memory device)
Note:
This function is only available in the Full Backup utility.
For further details review: Section 3-5-5 on page 3-44.
Figure 4-17 System Setup - Backup page
!! NOTICE:
When connecting external USB devices, be sure to execute Safety Directions found in the
Voluson i / Voluson e Basic User Manual.
“Full Backup” group
“User Settings Only”
group
To Next Page
Loading...
Need help?
General
