GE VOLUSON
i / VOLUSON
e
D
IRECTION KTI106052, REVISION 10 SERVICE MANUAL
Chapter 4 - Functional Checks 4-27
4-4-11 Formatting Media
1.) Select the “External Devices” tab on the left side of the Sonoview screen.
2.) Insert the medium and select the DVD/CD
icon.
The unit displays the “Erase DVD/CD” window as shown in Figure 4-15.
3.) Select the “Erase Mode” and click the [OK] button to start the process.
4.) When erasing is finished, select EXIT
to return to the Scan Mode.
4-4-11-1 Adjusting the Write Speed of the DVD/CD Recorder
1.) Click the SETTINGS
icon on the left side of the Sonoview screen.
2.) Select
DVD/CD RECORDER from the tool bar.
3.) Choose the “Write Speed” from the corresponding pop-up menu.
To erase the backup media DVD/CD+RW, press the ARCHIVE
key on the Control panel.
The Sonoview screen appears on the monitor; see: Figure 4-13 on page 4-26.
Figure 4-14 “External Devices” tab
!! NOTICE:
It is highly recommended to use the complete erase mode, to avoid problems with the CD+RW!
When using a DVD+RW, the complete erase mode is not possible.
Figure 4-15 Erase DVD/CD Window
Figure 4-16 Settings of the DVD/CD Recorder
DVD/CD icon
“External Devices” tab
To Next Page
Loading...
Need help?
General
