GE Voluson i BT06 - Replacement of the Back Column Cover; Manpower; Tools; Preparations

GE VOLUSON i / VOLUSON e
D
IRECTION KTI106052, REVISION 10 SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-49
8-19-5 Replacement of the Back Column Cover
8-19-5-1 Manpower
One person, 15 minutes
8-19-5-2 Tools
Phillips screwdriver 1
8-19-5-3 Preparations
1.) Remove the Cover Bottom as described in Section 8-19-4 on page 8-48.
8-19-5-4 Back Column Cover - Removal Procedure
1.) Screw off the 4 screws of the white part and carefully remove.
2.) Screw off the 4 screws of the gray part and carefully remove.
8-19-5-5 Back Column Cover - Installation Procedure
1.) Place the new Back Column Cover and fasten it with the screws.
2.) Mount the Cover Bottom as described in Section 8-19-4-5 on page 8-48.
Figure 8-67 screw off the screws