GE VOLUSON
i / VOLUSON
e
D
IRECTION KTI106052, REVISION 10 SERVICE MANUAL
8-46 Section 8-19 - Replacement of the Dock Cart Components
8-19-2 Replacement of the Tray upper
8-19-2-1 Manpower
One person, 10 minutes
8-19-2-2 Tools
Phillips screwdriver 1
Allen wrench 5
8-19-2-3 Preparation
1.) Put away all things on the Tray (e.g. Probes)
8-19-2-4 Tray upper - Removal Procedure
1.) Loosen the 4 Allen screws that fasten the Tray upper and carefully remove it.
2.) On the back side of the Tray screw off the 6 screws and you have the Trag only.
8-19-2-5 Tray upper - Installation Procedure
1.) Place the new Tray and fasten it (see Figure 8-62 on page 8-46 and Figure 8-61 on page 8-46).
Figure 8-61 screw off the 4 screws
Figure 8-62 screw off the 6 screws
To Next Page
Loading...
