GE VOLUSON
i / VOLUSON
e
D
IRECTION KTI106052, REVISION 10 SERVICE MANUAL
8-62 Section 8-20 - Replacement of the Voluson Station Components
8-20-3 Replacement of the Storage Tray Back
8-20-3-1 Manpower
One person, 5 minutes
8-20-3-2 Tools
Phillips screwdriver 1
8-20-3-3 Preparations
none
8-20-3-4 Storage Tray Back - Removal Procedure
1.) Screw off the screw and carefully remove the Storage Tray Back.
8-20-3-5 Storage Tray Back - Installation Procedure
1.) Place the new Storage Tray Back and fasten the screw.
Figure 8-82 screw off the screw