GE VOLUSON
i / VOLUSON
e
D
IRECTION KTI106052, REVISION 10 SERVICE MANUAL
8-72 Section 8-20 - Replacement of the Voluson Station Components
8-20-12 Replacement of the Top Shelf Additional Bottom Cover
8-20-12-1 Manpower
One person, 5 minutes
8-20-12-2 Tools
Phillips screwdriver 1
8-20-12-3 Preparations
none
8-20-12-4 Top Shelf Additional Bottom Cover - Removal Procedure
1.) Screw off the 4 screws and carefully remove it.
8-20-12-5 Top Shelf Additional Bottom Cover - Installation Procedure
1.) Place the new Top Shelf Additional Bottom Cover and fasten it with the 4 screws.
Figure 8-95 screw off the 5 screws