Xilinx Zynq-7000 User Manual

Zynq-7000 AP SoC and 7 Series FPGAs MIS v4.1 291
UG586 November 30, 2016
www.xilinx.com
Chapter 2: QDR II+ Memory Interface Solution
The Create Custom Part page includes all of the specifications of the memory component
selected in the Select Base Part pull-down menu.
1. Enter the appropriate Memory Part Name in the text box.
2. Select the suitable base part from the Select Base Part list.
3. Select a suitable value for the Row Address.
4. After editing the required fields, click Save. The new part is saved with the selected
name. This new part is added in the Memory Parts list on the Controller Options page.
It is also saved into the database for reuse and to produce the design.
5. Click Next to display the FPGA Options page.
Memory Options
Figure 2-20 shows the Memory Options page.
X-Ref Target - Figure 2-20
Figure 2-20: Memory Options Page
Send Feedback

Xilinx Zynq-7000 Specifications

General

Brand	Xilinx
Model	Zynq-7000
Category	Motherboard
Language	English