Version 5.2 177 September 2007
SIP User's Manual 5. Web-based Management
Table 5-35: Media Server Parameters
Parameter Description
Enable Answer Detector
[EnableAnswerDetector]
N/A.
Answer Detector Activity Delay
[AnswerDetectorActivityDelay]
N/A.
Answer Detector Silence Time
[AnswerDetectorSilenceTime]
N/A.
Answer Detector Redirection
[AnswerDetectorRedirection]
N/A.
Answer Detector Sensitivity
[AnswerDetectorSensitivity]
Determines the Answer Detector sensitivity.
The range is 0 (most sensitive) to 2 (least sensitive). The default is
0.
Enable Energy Detector
[EnableEnergyDetector]
N/A
Energy Detector Quality Factor
[EnergyDetectorQualityFactor]
N/A
Energy Detector Threshold
[EnergyDetectorThreshold]
N/A
Enable Pattern Detector
[EnablePatternDetector]
Enables or disables the activation of the Pattern Detector (PD).
Valid options include:
 [0] Disable = Disable (default)
 [1] Enable = Enable
5.7.5 Configuring the General Media Settings
¾ To configure the General Media Settings parameters, take these 4
steps:
1. Open the 'General Media Settings' screen (Advanced Configuration menu > Media
Settings > General Media Settings option).
Figure 5-36: General Media Settings Screen
2. Configure the General Media Settings according to the table below.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to 'Saving Configuration' on page 256.
To Next Page
Loading...
Need help?
General