Version 5.2 291 September 2007
SIP User's Manual 6. ini File Configuration
Table 6-4: Security Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
HTTPSPkeyFileName
Defines the name of a private key file (in unencrypted PEM format) to be
loaded from the TFTP server.
HTTPSCertFileName
Defines the name of the HTTPS server certificate file to be loaded via
TFTP. The file must be in base64-encoded PEM format.
The valid range is a 47-character string.
Note: This parameter is only relevant when the gateway is loaded via
BootP/TFTP. For information on loading this file via the Embedded Web
Server, refer to the SIP Series Reference Manual.
Internal Firewall Parameters
AccessList_Source_IP
For a description of this parameter, refer to 'Configuring the Firewall
Settings' on page 200.
AccessList_Net_Mask
For a description of this parameter, refer to 'Configuring the Firewall
Settings' on page 200.
AccessList_Start_Port
AccessList_End_Port
For a description of this parameter, refer to 'Configuring the Firewall
Settings' on page 200.
AccessList_Protocol
For a description of this parameter, refer to 'Configuring the Firewall
Settings' on page 200.
AccessList_Packet_Size
For a description of this parameter, refer to 'Configuring the Firewall
Settings' on page 200.
AccessList_Byte_Rate
For a description of this parameter, refer to 'Configuring the Firewall
Settings' on page 200.
AccessList_Byte_Burst
For a description of this parameter, refer to 'Configuring the Firewall
Settings' on page 200.
AccessList_Allow_Type
For a description of this parameter, refer to 'Configuring the Firewall
Settings' on page 200.
AccessList_MatchCount
For a description of this parameter, refer to 'Configuring the Firewall
Settings' on page 200.
6.5.5 RADIUS Parameters
For detailed information on the supported RADIUS attributes, refer to 'Supported RADIUS
Attributes' on page 354.
Table 6-5: RADIUS Parameter
ini File Field Name
Web Parameter Name
Valid Range and Description
EnableRADIUS
For a description of this parameter, refer to 'Configuring the General
Security Settings' on page 206.
AAAIndications
For a description of this parameter, refer to 'Configuring RADIUS
Accounting Parameters' on page 147.