SIP User's Manual 354 Document #: LTRT-68806
Mediant 2000 & TP-1610 & TP-260/UNI
7.8 Supported RADIUS Attributes
Use the following table for explanations on the RADIUS attributes contained in the
communication packets transmitted between the gateway and a RADIUS Server.
Table 7-3: Supported RADIUS Attributes
Attribute
Number
Attribute
Name
VSA
No.
Purpose
Value
Format
Example AAA
1
Request Attributes
1 User-Name
Account number or calling
party number or blank
String up
to 15
digits
long
5421385747
Start Acc
Stop Acc
4
NAS-IP-
Address
IP address of the
requesting gateway
Numeric 192.168.14.43
Start Acc
Stop Acc
6 Service-Type Type of service requested Numeric 1: login
Start Acc
Stop Acc
26
h323-
incoming-conf-
id
1 SIP call identifier
Up to 32
octets
Start Acc
Stop Acc
26
h323-remote-
address
23
IP address of the remote
gateway
Numeric
Stop Acc
26 h323-conf-id 24 H.323/SIP call identifier
Up to 32
octets
Start Acc
Stop Acc
26
h323-setup-
time
25 Setup time in NTP format 1 String
Start Acc
Stop Acc
26
h323-call-
origin
26
The call’s originator:
nswering (IP) or Originator
(PSTN)
String
Answer,
Originate etc
Start Acc
Stop Acc
26 h323-call-type 27
Protocol type or family used
on this leg of the call
String VoIP
Start Acc
Stop Acc
26
h323-connect-
time
28 Connect time in NTP format String
Stop Acc
26
h323-
disconnect-
time
29
Disconnect time in NTP
format
String
Stop Acc
26
h323-
disconnect-
cause
30
Q.931 disconnect cause
code
Numeric
Stop Acc
26 h323-gw-id 33 Name of the gateway String SIPIDString
Start Acc
Stop Acc
26 SIP-Call-ID 34 SIP Call ID String abcde@ac.com
Start Acc
Stop Acc
26
Call-
Terminator
35
The call's terminator:
PSTN-terminated call (Yes);
IP-terminated call (No).
String Yes, No Stop Acc
To Next Page
Loading...
Need help?
General