SIP User's Manual 268 Document #: LTRT-68806
Mediant 2000 & TP-1610 & TP-260/UNI
3. Save the new settings, and then close the file.
4. Load the modified ini file to the gateway (using either BootP/TFTP utility or the
Embedded Web Server).
This method of modifying the ini file preserves the configuration that already exists in the
device, including special default values that were preconfigured when the unit was
manufactured.
Tip: Before loading the ini file to the gateway, verify that the file extension of the ini
file saved on your PC is correct (i.e., xxx.ini). If the file extension name is not
displayed, verify that the check box 'Hide extensions for known file types' (My
Computer > Tools > Folder Options > View) is unchecked.
6.3 The ini File Content
The ini file contains the following gateway information:
îš„ Networking parameters (refer to 'Networking Parameters' on page 273)
îš„ System parameters (refer to 'System Parameters' on page 280)
îš„ Web and Telnet parameters (refer to 'Web and Telnet Parameters' on page 287)
îš„ Security parameters (refer to 'Security' on page 290)
îš„ RADIUS parameters (refer to 'RADIUS Parameters' on page 291)
îš„ SNMP parameters (refer to 'SNMP Parameters' on page 293)
îš„ SIP Configuration parameters (refer to 'SIP Configuration Parameters' on page 295)
îš„ Media Server parameters (refer to 'Media Server Parameters' on page 306
îš„ Voice Mail parameters (refer to 'Voice Mail Parameters' on page 306)
îš„ PSTN parameters (refer to 'PSTN Parameters' on page 307)
îš„ ISDN and CAS Interworking-Related Parameters (refer to 'ISDN and CAS
Interworking-Related Parameters' on page 311)
îš„ Number Manipulation and Routing parameters (refer to 'Number Manipulation and
Routing Parameters' on page 318)
îš„ Channel Parameters (refer to 'Channel Parameters' on page 332)
îš„ Configuration Files parameters (refer to 'Configuration Files Parameters' on page 337)
6.4 The ini File Structure
The ini file can contain any number of parameters. The ini file consists of individual
parameters, which are conveniently grouped into subsections by their functionality, as well
as table parameters, which include multiple ini file parameters. The ini file structure for the
individual ini files and ini file parameter tables are described in 'Structure of Individual ini
File Parameters' on page 269 and 'Configuring Parameter Tables Using the ini File' on
page 269 respectively.
To Next Page
Loading...
Need help?
General