Version 5.2 197 September 2007
SIP User's Manual 5. Web-based Management
5.9 Security Settings
From the Security Settings submenu, you can configure the following:
îš„ Web User Accounts (refer to 'Configuring the Web User Accounts' on page 197)
îš„ Web & Telnet Access List (refer to 'Configuring the Web and Telnet Access List' on
page 199)
îš„ Firewall Settings (refer to 'Configuring the Firewall Settings' on page 200)
îš„ Certificates (refer to 'Configuring the Certificates' on page 202)
îš„ General Security Settings (refer to 'Configuring the General Security Settings' on page
206)
îš„ IPSec Table (refer to 'Configuring the IPSec Table' on page 210)
îš„ IKE Table (refer to 'Configuring the IKE Table' on page 214)
5.9.1 Configuring the Web User Accounts
To prevent unauthorized access to the Embedded Web Server, two user accounts are
available, a primary and secondary. Each account is composed of three attributes:
username, password, and access level. For detailed information on the user account
mechanism, refer to 'User Accounts' on page 58.
It is recommended that you change the default username and password of the account
used to access the Embedded Web Server.
To Next Page
Loading...
Need help?
General