SIP User's Manual 198 Document #: LTRT-68806
Mediant 2000 & TP-1610 & TP-260/UNI
¾ To change the Web User Accounts attributes, take these 4 steps:
1. Open the 'Web User Accounts' screen (Advanced Configuration menu > Security
Settings > Web User Accounts option).
Figure 5-39: Web User Accounts Screen (for Users with 'Security Administrator' Privileges)
2. To change the access level of the secondary account (the access level of the primary
account cannot be changed), from the 'Access Level' drop-down list, select the new
access level, and then click Change Access Level; the new access level is applied
immediately.
3. To change the username of an account, enter the new username in the field 'User
Name', and then click Change User Name; the new username is applied immediately
and the 'Enter Network Password' screen appears. Enter the updated username in the
'Enter Network Password' screen. Note that the username can be a maximum of 19
case-sensitive characters.
4. To change the password of an account, enter the current password in the field
'Current Password', the new password in the fields 'New Password' and 'Confirm New
Password', and then click Change Password; the new password is applied
immediately and the 'Enter Network Password' screen appears. Enter the updated
password in the 'Enter Network Password' screen. Note that the password can be a
maximum of 19 case-sensitive characters.
Note: A user with a 'Security Administrator' access level can change all attributes for
all accounts. Users with an access level other than 'Security Administrator'
can only change their own password and username.
To Next Page
Loading...
Need help?
General