SIP User's Manual 70 Document #: LTRT-68806
Mediant 2000 & TP-1610 & TP-260/UNI
5.4.5.4 Creating a Login Welcome Message
You can create a Welcome message box (alert message) that appears (see figure below for an
example) after each successful login to the gateway's Embedded Web Server. The ini file parameter
table WelcomeMessage allows you to create the Welcome message. Up to 20 lines of character
strings can be defined for the message. If this parameter is not configured, no Welcome message box
is displayed after login.
Figure 5-7: User-Defined Web Welcome Message after Login
Table 5-7: User-Defined Welcome Message ini File Parameter
Parameter Description
WelcomeMessage
Configures the Welcome message that appears after a Embedded Web
Server login.
The format of this ini file parameter table is:
[WelcomeMessage]
FORMAT WelcomeMessage_Index = WelcomeMessage_Text
WelcomeMessage 1 = "..." ;
WelcomeMessage 2 = "..." ;
WelcomeMessage 3 = "..." ;
[\WelcomeMessage]
For Example:
[WelcomeMessage ]
FORMAT WelcomeMessage_Index = WelcomeMessage_Text
WelcomeMessage 1 = "**********************************" ;
WelcomeMessage 2 = "********* This is a Welcome message ***" ;
WelcomeMessage 3 = "**********************************" ;
[\WelcomeMessage]
Note: Each index represents a line of text in the Welcome message box.
Up to 20 indexes can be defined.
To Next Page
Loading...
Need help?
General