SIP User's Manual 218 Document #: LTRT-68806
Mediant 2000 & TP-1610 & TP-260/UNI
5.10 Configuring the Management Settings
The 'Management Settings' screen is used to configure the gateway's management
parameters.
¾ To configure the Management Settings parameters, take these 4
steps:
1. Open the 'Management Settings' screen (Advanced Configuration menu >
Management Settings).
2. Configure the Management Settings according to the table below.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to 'Saving Configuration' on page 256.
To Next Page
Loading...
Need help?
General