Version 5.2 63 September 2007
SIP User's Manual 5. Web-based Management
5.4.4 Searching for Configuration Parameters
The Embedded Web Server provides a search engine that allows you to search any ini file
parameter that is configurable by the Web server. The Search button, located near the
bottom of the Main menu bar is used to perform parameter searches.
You can search for a specific parameter (e.g., "EnableIPSec") or a sub-string of that
parameter (e.g., "sec"). If you search for a sub-string, the Embedded Web Server lists all
parameters that contain the searched sub-string in their parameter names.
¾ To search for ini file parameters configurable in the Embedded
Web Server, take these 3 steps:
1. In the Search Engine field, enter the parameter name or sub-string of the parameter
name.
2. Click Search. The Searched Result screen appears, listing all searched parameter
results, as shown in the example below:
Figure 5-2: Searched Result Screen
Each searched result displays the following:
• Parameter name (hyperlinked to its location in the Embedded Web Server)
• Brief description of the parameter
• Hyperlink in green displaying the URL path to its location in the Embedded Web
Server location
To Next Page
Loading...
Need help?
General