AudioCodes Mediant 2000 System User Manual

Version 5.2 221 September 2007
SIP User's Manual 5. Web-based Management
5.10.1 Configuring the SNMP Trap Destinations Table
The 'SNMP Trap Destinations' screen allows you to configure the attributes of up to five
SNMP managers.
¾ To configure the SNMP Trap Destination table, take these 5 steps:
1. Access the 'Management Settings' screen (Advanced Configuration menu >
Management Settings); the 'Management Settings' screen is displayed (refer to
'Configuring the Management Settings' on page 218).
2. Open the 'SNMP Trap Destination' screen by clicking the arrow sign (-->) to the right
of the SNMP Trap Destinations label.
Figure 5-45: SNMP Trap Destinations Screen
3. Configure the SNMP Trap parameters according to the table below.
4. Click the Submit button to save your changes.
5. To save the changes to flash memory, refer to 'Saving Configuration' on page 256.
Note: If you clear a check box and then click Submit, all settings in the same row
revert to their defaults.

AudioCodes Mediant 2000 System Specifications

General

Brand	AudioCodes
Model	Mediant 2000 System
Category	VoIP
Language	English