Removable HDD Kit
13WK-0J0
The "Removable HDD Kit" is a hard disk holder with which you can remove the hard disk in the machine. Remove and
store the hard disk in a safe place to protect your data.
Hard disk holder
Holds the hard disk and attaches to the machine. To store the hard disk, remove this hard disk holder.
Front cover
Open this cover to set/remove the hard disk holder. You can install a commercial lock.
● A lock is not included with the "Removable HDD Kit." Purchase a lock that is commercially available for
security.
● If you use the option together with the "HDD Mirroring Kit," you can store data onto two hard disks.
System Options(P. 1121)
● If the <E602-0001> message appears on the touch panel display when the machine starts, a hard disk may
not be set in the hard disk holder. Turn OFF the machine and check that the main power indicator on the
control panel is not lit, and then check whether the hard disk is set. If the error message still appears even
though a hard disk is set, contact your local authorized Canon dealer.
Setting/Removing the Hard Disk Holder
Setting the hard disk holder
1
Open the right cover of the machine.
Appendix
1116
To Next Page
Loading...
Need help?
General
