Updating the Firmware
13WK-0EC
New rmware is periodically released to add new functions or resolve issues with
existing functions. If new rmware is available, follow the procedure below to update
it on the machine. Administrator privileges are required in order to update the
rmware.
Preparing to update the rmware
● Save the latest rmware data from Canon to a computer.
● Back up the machine data and settings in case the rmware update is not performed properly.
Backing Up/Restoring Data(P. 694)
Importing/Exporting the Setting Data(P. 682)
1
Start the Remote UI. Starting the Remote UI(P. 648)
2
Click [Settings/Registration] on the portal page. Remote UI Screen(P. 649)
3
Click [License/Other] [Register/Update Software].
4
Click [Manual Update].
5
Click [Browse...], select the rmware update to use, and click [Next].
6
Click [Yes].
● When the [The rmware is updated. Restart the device.] message appears, turn the machine OFF and back
ON. Turning OFF/Restarting the Machine(P. 657)
Managing the Machine
699
To Next Page
Loading...
Need help?
General
