Canon imagerunner advance C5550i User Manual

Setting Binding Margins
13WK-04J
You can make binding margins for stapling or punching holes. You can set binding
margins on the front side and back side of pages individually.
● When the margin is set, images are shifted by the margin width and copied. An original whose image
extends all the way to the edges of the sheet may be partially cut off on the copy.
1
Place the original. Placing Originals(P. 106)
2
Press <Copy> on the Main Menu. <Main Menu> Screen(P. 94)
3
Press <Options> on the Copy Basic Features screen. Copy Basic Features
Screen(P. 208)
4
Press <Gutter>.
5
Select the margin position.
● If <Gutter> is set with <N on 1> ( Copying Multiple Originals onto One Sheet (N on 1)(P. 234) ), the
margin specied for the front side is applied to both sides. The margin specied for the back side is not
applied.
6
Enter the margin width.
● Press <Front Side> or <Back Side> and enter each margin width.
● If you enter a number smaller than 0, the margin is set on the opposite side of the position specied in step
4. Use this if you want to narrow the margin width when copying an original that already has margins.
● If you press <±>, the value switches between <-> and <+>.
Copying
260

Canon imagerunner advance C5550i Specifications

General

Type	Color Laser Multifunction Printer
Print Resolution	1200 x 1200 dpi
Scan Resolution	Up to 600 x 600 dpi
Paper Capacity	Standard: 1, 200 sheets; Maximum: 6, 350 sheets
Hard Disk Drive	250 GB
Duplex Printing	Yes
Operating System Compatibility	Windows, Mac OS, Linux
Functions	Print, Copy, Scan
Print Speed	Up to 50 ppm
Copy Speed	Up to 50 ppm (Letter)
Connectivity	USB, Ethernet, Wi-Fi
Display	10.1-inch TFT LCD WSVGA Color Touch Panel
Warm-up Time	Approximately 30 seconds
Memory	4 GB RAM
Fax Resolution	Up to 400 x 400 dpi
Dimensions	620 mm x 742 mm x 932 mm (W x D x H)