Specifying the Mail Box Settings
13WK-098
You can set a password and name for the Mail Box as well as change the period of time before les are automatically
deleted.
1
Press .
2
Press <Function Settings> <Store/Access Files> <Mail Box Settings> <Set/
Register Mail Boxes>.
3
Select the desired box.
4
Specify the settings necessary and press <OK>.
<Register Box Name>
Enter a name for the box.
<PIN>
Set a password for the box. Enter a number of up to seven digits, press <Conrm>, enter the same
password, and then press <OK>.
● Passwords with only "0" are not allowed.
● If you forget your password, there is no way to retrieve it. Be careful not to forget the password.
<Time Until File Auto Delete>
Press <->/<+> to change the period of time until saved les are automatically deleted. When set to "0," les
will not be deleted.
<URL Send Settings>
Noties you by e-mail of the location (URL) of the box where les are saved. This setting is helpful for
checking saved les from the Remote UI screen.
<Initialize>
Restores all the settings to the factory default values. Note that you cannot initialize the settings when les
are stored in the box.
<Print When Storing from Printer Driver>
Specify whether to print a le when it is sent from a computer and saved in the box.
Using Storage Space
505
To Next Page
Loading...
Need help?
General
