Erasing Dark Borders When Copying (Erase Frame)
13WK-03W
When copying originals that are smaller than the output paper size, frame lines of
the originals may appear in the copied image. When copying thick books, dark
borders may appear. <Erase Frame> enables you to erase these frame lines and dark
borders. You can also set the machine to not copy punch holes in the originals.
● Place originals with punch holes on the platen glass. Placing them in the feeder may result in damage.
1
Place the original. Placing Originals(P. 106)
2
Press <Copy> on the Main Menu. <Main Menu> Screen(P. 94)
3
Press <Options> on the Copy Basic Features screen. Copy Basic Features
Screen(P. 208)
4
Press <Erase Frame>.
5
Specify erasing type and width.
Erasing the frames in copies of documents
1
Press <Erase Original Frame> and set <Original Size>.
● If the size displayed in <Original Size> is different from the size of the original you set, press <Change>
to select the size.
2
Enter the width of the frame to erase.
Erasing the dark borders in copies of books
You can erase the dark borders both in the center and contour lines that appear when you copy facing pages
in a book.
Copying
225
To Next Page
Loading...
Need help?
General
