Scanning Originals from an Application
13WK-08F
This section describes the method for scanning an original by starting Color Network ScanGear 2 from an application.
You can also scan a part of the original by specifying the scanning area.
From the control panel
1
Place the original. Placing Originals(P. 106)
● To specify the scanning area, place the original on the platen glass.
● To scan multiple pages successively, place the originals in the feeder.
2
Press <Scanner> on the Main Menu. <Main Menu> Screen(P. 94)
3
Press <Online>.
➠
Now you are ready for scanning from your computer.
● During the online state, other functions such as copying are not available.
From a computer
4
From the application menu, select the command that starts the scanning.
● Color Network ScanGear 2 starts. For more information, see the instruction manual for each application.
5
At [Scanning Method] of the [Basic Settings] tab, select the location where the
original is placed.
● When placing the original on the platen glass, select [Platen Glass].
● When placing a 1-sided original in the feeder, select [Feeder (1-sided)]. For 2-sided originals, select [Feeder (2-
sided)].
Scanning
467
To Next Page
Loading...
Need help?
General
