Installing System Options
13WK-0EH
When using system options, you may need to log in with Administrator privileges to
register licenses. To register a license, you will need the number that is printed on
the license access number certicate. Make sure to have it with you before you start.
You can perform license registration online or oine.
1
Perform a communication test.
● Test whether you can register the license over the network.
1
Press .
2
Press <Management Settings> <License/Other> <Register/Update Software> <Software
Management Settings>.
3
Press <Test Communication>.
➠ The <Do you want to test communication?> message is displayed.
4
Press <Yes>.
➠ The results of the communication test are displayed.
● If <NG> is displayed, check that the LAN cable is connected and the network settings are congured
properly. Setting up Using the Setup Guide(P. 7)
● If you cannot connect to the network, register the license online. When Registration Cannot Be
Performed over the Network(P. 705)
2
Press .
3
Press <Management Settings> <License/Other> <Register/Update Software>
<Install Applications/Options>.
4
Press <License Access Number>, and enter the license access number.
5
Conrm the number, and press <Enable>.
6
Select the function to install, and press <Install>.
● If the license agreement screen is displayed, check the information and press <I Agree>.
7
Press
<Apply Set. Changes>
<Yes>.
Managing the Machine
704
To Next Page
Loading...
Need help?
General
