To Next Page

To Previous Page

13WK-0JW

This section describes the copy and print nishing settings, such as adjusting the saddle stitch position.

Feeds papers to the saddle stitcher unit and staple them several times, and performs the saddle stitch staple

repositioning procedure. The machine performs this adjustment procedure after you clear a paper jam or

replace the staple cartridge.

● Only use 330×482 mm, 320×450 mm, 305×457 mm, A3, B4, A4R, 11" x 17", LGL, or LTRR paper for the

saddle stitch staple repositioning procedure.

● Make sure to remove all output booklets from the booklet tray before performing the saddle stitch

staple repositioning procedure.

● Paper that is required for the saddle stitch staple repositioning procedure is automatically fed to the

saddle stitcher unit by the machine.

If you notice that the saddle stitch position of the paper is not exactly in the middle of the booklet, you can

make adjustments to the saddle stitch position to compensate for this error. Adjust the folding position of the

paper and the saddle stitch position at the same time.

Adjusting the Saddle Stitch Position(P. 885)

If you notice that the folds of the paper are not exactly in the middle of the booklet, you can make adjustments

to the fold placement to compensate for this error. This mode enables you to adjust the folding position without

changing the stapling position. Adjusting the Saddle Stitch Folding Position(P. 886)

You can set whether to give priority to the punching speed or to precision.

You can adjust the paper folding position. Adjusting the Paper Folding Position(P. 887)

Settings/Registration

756

Canon imagerunner advance C5550i User Manual

Other manuals for Canon imagerunner advance C5550i