Loading Envelopes
13WK-027
When printing on envelopes, to prevent paper jams and wrinkles, make sure to atten any curls on envelopes before
loading them. Also pay attention to the orientation of envelopes and which side is face up.
● This section describes how to load envelopes with the proper orientation, as well as procedures that you
need to complete before loading envelopes. For a description of the general procedure for loading
envelopes in the multi-purpose tray, see Loading Paper in the Multi-Purpose Tray(P. 117) .
◼
Before Loading Envelopes
Follow the procedure below to prepare the envelopes before loading.
● Do not use envelopes that have glue attached to their aps, as the glue may melt due to the heat and
pressure of the xing unit.
1
Flatten any curls.
● Pick up about ve envelopes. Flatten any curls, and loosen the stiff areas in the four corners.
2
Smooth the envelopes out, and remove any air inside them.
Basic Operations
120
To Next Page
Loading...
Need help?
General
