Specifying MAC Addresses in Firewall Settings
13WK-0C0
You can set whether to allow or reject communication with a device that has a specic MAC address.
1
Press .
2
Press <Preferences> <Network> <Firewall Settings> <MAC Address Filter>.
3
Select <Outbound Filter> or <Inbound Filter>.
● To restrict data sent from the machine to a computer, select <Outbound Filter>.
● To restrict data received from a computer, select <Inbound Filter>.
4
Set <Use Filter> to <On>, select <Default Policy>, then press <Register>.
● For <Default Policy>, select <Reject> to only allow communication with devices that have a MAC address
specied in <Exception Addresses> in the next step, or select <Allow> to reject communication with them.
● If <Reject> is selected for <Default Policy>, the restrictions do not apply to sending to multicast or broadcast
addresses.
5
Enter the exception addresses, and press <OK>.
● Specify the MAC addresses to designate as exceptions of the <Default Policy> option selected in the previous
step.
To edit an exception address
● On the screen displayed in step 4, select the exception address that you want to edit, and press <Edit> to
display the edit screen.
6
Press <OK>.
7
Press
<Apply Set. Changes>
<Yes>.
Managing the Machine
600
To Next Page
Loading...
Need help?
General
