Basic Operations for Sending Faxes
13WK-05L
This section describes the basic operations for sending fax documents.
1
Place the original. Placing Originals(P. 106)
2
Press <Fax> on the Main Menu. <Main Menu> Screen(P. 94)
3
Specify the destination on the Fax Basic Features screen. Fax Basic Features
Screen(P. 316)
Specifying Destinations from the Address Book
Specifying Destinations from One-Touch Buttons
Entering Destinations Manually
Specifying Destinations in the LDAP Server
To check the detailed information about the specied destination, select the desired destination using
and and press <De- tails>. To delete a destination from the specied destinations, press <Delete Dest.>.
Specifying Destinations from the Address Book
1
Press <Address Book>.
2
Select the destination and press <OK>.
● If an access number is set when the destination is registered, press <Access No.> and enter the access
number using the numeric keys. The corresponding destination is displayed in the Address Book.
● To use the Remote Address Book, press <To Remote Address Book>. When <Change Address Book> is
displayed, press <Change Address Book> <Remote>.
Destination type buttons
Pressing and displays fax and group destinations, respectively.
Drop-down list for selection of Address Book types
Faxing
319
To Next Page
Loading...
Need help?
General
