● A Fax Multi TX Report is printed when <Fax TX Report> is set to <On> and broadcast transmission is
performed.
● Even if you set <Report with TX Image> to <On> in the report settings, the image of the sent original
does not appear in a report when a fax is directly sent to the destination using direct sending (
Checking the Connection to the Recipient Before Sending (Direct Send)(P. 338) ) or manual
sending ( Sending Faxes Manually (Manual Sending)(P. 340) ).
Fax RX Report
You can set a Fax RX Report to print automatically every time a fax is received. It is also possible to set the
report to print only when an error occurs.
<Function Settings> <Receive/Forward> <Fax Settings> <Fax RX Report> Set the
report <OK>
Condential Fax Inbox RX Report
You can congure the machine to automatically print the report when a received fax is saved in the Condential
Fax Inbox. You can also congure the setting so that the report is not printed.
<Function Settings> <Receive/Forward> <Fax Settings> <Condential Fax Inbox RX
Report> Set the report <OK>
● Even though <Off> is set in this setting, if Fax RX Report(P. 894) is enabled, a report is printed when
a fax is saved in the Condential Fax Inbox.
Printer Report
You can print and check the information of a printer driver, such as the font list and status.
<Function Settings>
<Printer>
<Output Report>
Select the printer driver
Follow the
on-screen instructions to select the item to be printed
Device Information Communication Log Report
You can congure the machine to automatically print the report when the specied number of results for device
information distribution or reception is reached. You can also congure the setting to print the report at a
specied time. You are required to log in with Administrator privileges to change the report setting.
Maintenance
894
To Next Page
Loading...
Need help?
General
