Canon imagerunner advance C5550i User Manual

● Make sure that the original stack does not exceed the load limit lines ( ). If you place originals that
exceed the limit, they may not be scanned or may cause a paper jam.
● Always smooth out any folds in your originals before placing them into the feeder. If the original is folded,
an error screen may be displayed because the size of originals cannot be detected correctly.
● Thin originals may become creased, if used in a high temperature or high humidity environment.
● When copying 2-sided original, place the original so that the top and the bottom are properly positioned,
as shown in the illustration below.
● You can place different sized originals and scan them all at once.
Copying Different Size Originals Together (Different Size Originals)(P. 238)
Sending Different Size Originals Together (Different Size Originals)(P. 344)
Sending/Saving Different Size Originals Together (Different Size Originals)(P. 433)
4
Align the slide guides against the edges of the original.
● Move the slide guides inward until they are aligned securely against the edges of the original.
➠ Originals are ready for scanning.
Align the slide guides securely against the edges of the original
● Slide guides that are too loose or too tight can cause misfeeds or paper jam.
Basic Operations
109

Canon imagerunner advance C5550i Specifications

General

Type	Color Laser Multifunction Printer
Print Resolution	1200 x 1200 dpi
Scan Resolution	Up to 600 x 600 dpi
Paper Capacity	Standard: 1, 200 sheets; Maximum: 6, 350 sheets
Hard Disk Drive	250 GB
Duplex Printing	Yes
Operating System Compatibility	Windows, Mac OS, Linux
Functions	Print, Copy, Scan
Print Speed	Up to 50 ppm
Copy Speed	Up to 50 ppm (Letter)
Connectivity	USB, Ethernet, Wi-Fi
Display	10.1-inch TFT LCD WSVGA Color Touch Panel
Warm-up Time	Approximately 30 seconds
Memory	4 GB RAM
Fax Resolution	Up to 400 x 400 dpi
Dimensions	620 mm x 742 mm x 932 mm (W x D x H)