Canon imagerunner advance C5550i User Manual

● Touch two opposing points with the edit pen to specify a rectangular area. Specify an area that encloses the
area you want to copy in a rectangle.
Two opposing points to enter
The area to copy
● To cancel a point you have specied, press <Delete Point>. To delete the area after you have specied it,
press <Clear Area>.
● If it is dicult to specify the area because the image displayed on the preview screen is small, press <100%
> to enlarge it. You can press , , , or after selecting the zoom ratio to move to the location you
want to display.
● If it is dicult to specify an area because the space between text or images is small, press <Fine Adjust> to
perform ne adjustment of the area. You can move the position of an individual point by selecting the
desired <Move Point> button after selecting one of the corner points by pressing the <Select Point>.
● You can specify up to four areas. After specifying the rst area, press
, , or to
specify the second and subsequent areas.
● If the area of a specied area is too small, the color information of the original may not be correctly detected,
and the copy may be output in black and white.
8
Press <Framing> <Preview>.
If you press <Framing>, the specied areas are copied.
If you press <Blanking>, the contents outside the specied areas are copied.
Copying
292

Canon imagerunner advance C5550i Specifications

General

Type	Color Laser Multifunction Printer
Print Resolution	1200 x 1200 dpi
Scan Resolution	Up to 600 x 600 dpi
Paper Capacity	Standard: 1, 200 sheets; Maximum: 6, 350 sheets
Hard Disk Drive	250 GB
Duplex Printing	Yes
Operating System Compatibility	Windows, Mac OS, Linux
Functions	Print, Copy, Scan
Print Speed	Up to 50 ppm
Copy Speed	Up to 50 ppm (Letter)
Connectivity	USB, Ethernet, Wi-Fi
Display	10.1-inch TFT LCD WSVGA Color Touch Panel
Warm-up Time	Approximately 30 seconds
Memory	4 GB RAM
Fax Resolution	Up to 400 x 400 dpi
Dimensions	620 mm x 742 mm x 932 mm (W x D x H)