Canon imagerunner advance C5550i User Manual

● Place the test page with the print side facing down, making sure that the gray stripe is facing the left edge of
the machine.
6
Press <Start Scanning>.
● The machine starts scanning the test page.
Creating a Color Adjustment Standard
You can create and register an adjustment standard of your choice. Up to four adjustment standards can be
registered.
1
Press <Adjustment/Maintenance> <Adjust Image Quality> <Auto Correct
Color Tone Settings>.
2
Press <Register Correction Pattern> <Yes>.
● If you have not performed auto gradation adjustment (full adjustment), press <No> to execute it.
Adjusting Gradation(P. 871)
3
Select the destination to register the new adjustment standard press <Next>.
4
Select the paper, press <Next> select the paper source, and press <OK>.
5
Press <Start Printing>.
● A test page is printed.
6
Place the test page on the platen glass.
● Place the test page with the print side facing down, making sure that the gray stripe is facing the left edge of
the machine.
7
Press <Start Scanning>.
● The machine starts scanning the test page.
Maintenance
875

Canon imagerunner advance C5550i Specifications

General

Type	Color Laser Multifunction Printer
Print Resolution	1200 x 1200 dpi
Scan Resolution	Up to 600 x 600 dpi
Paper Capacity	Standard: 1, 200 sheets; Maximum: 6, 350 sheets
Hard Disk Drive	250 GB
Duplex Printing	Yes
Operating System Compatibility	Windows, Mac OS, Linux
Functions	Print, Copy, Scan
Print Speed	Up to 50 ppm
Copy Speed	Up to 50 ppm (Letter)
Connectivity	USB, Ethernet, Wi-Fi
Display	10.1-inch TFT LCD WSVGA Color Touch Panel
Warm-up Time	Approximately 30 seconds
Memory	4 GB RAM
Fax Resolution	Up to 400 x 400 dpi
Dimensions	620 mm x 742 mm x 932 mm (W x D x H)