Canon imagerunner advance C5550i User Manual

Specify the following settings again.
Setting Up the Connection Using WPS Push Button Mode(P. 26)
Setting Up the Connection Using WPS PIN Code Mode(P. 27)
Setting Up Connection by Selecting a Wireless Router(P. 28)
Setting Up a Connection by Specifying Detailed Settings(P. 29)
If settings require manual entry
● If the wireless LAN router is set as follows, perform manual entry ( Setting Up a Connection by
Specifying Detailed Settings(P. 29) ):
- ANY rejection* is enabled.
- An automatically generated WEP key (hexadecimal) is set.
- The stealth function is enabled.
* A wireless LAN router function for refusing connections if the device trying to connect has "ANY" or "blank" set for the SSID.
If it is necessary to change the settings on the wireless LAN router side
● If the wireless LAN router is set as follows, change the settings on the router side:
- MAC address ltering is set.
- WEP is selected or WPA/WPA2 encryption is set for the TKIP when communicating only with IEEE 802.11.
Troubleshooting
916

Canon imagerunner advance C5550i Specifications

General

Type	Color Laser Multifunction Printer
Print Resolution	1200 x 1200 dpi
Scan Resolution	Up to 600 x 600 dpi
Paper Capacity	Standard: 1, 200 sheets; Maximum: 6, 350 sheets
Hard Disk Drive	250 GB
Duplex Printing	Yes
Operating System Compatibility	Windows, Mac OS, Linux
Functions	Print, Copy, Scan
Print Speed	Up to 50 ppm
Copy Speed	Up to 50 ppm (Letter)
Connectivity	USB, Ethernet, Wi-Fi
Display	10.1-inch TFT LCD WSVGA Color Touch Panel
Warm-up Time	Approximately 30 seconds
Memory	4 GB RAM
Fax Resolution	Up to 400 x 400 dpi
Dimensions	620 mm x 742 mm x 932 mm (W x D x H)