Hiwin E1 Series User Manual

E1 Series Servo Drive User Manual Panel Operation
HIWIN MIKROSYSTEM CORP. 14-15
MD09UE01-1910
14.4.2 Saving parameter to servo drive (Ft001)
Table14.4.2.1
Step Display Key Operation
1
Press F key to go to auxiliary function mode
(Ft). Press UP or DOWN
key to display
Ft001.
2
Press DATA/SHIFT
key for one second to
show the display on the left.
3
(Blinking)
Press F key to save parameter to Flash.
When the saving completes, the display on
the left shows.
4
－
After parameter is saved to Flash, the
display on the panel automatically returns to
the display on the left.
5
After parameter is saved to Flash, reconnect the control power of the servo drive. Then, the modification
becomes effective.

Hiwin E1 Series Specifications

General

Brand	Hiwin
Model	E1 Series
Category	Servo Drives
Language	English