Hiwin E1 Series User Manual

E1 Series Servo Drive User Manual Basic Function Settings Before Operation
6-2 HIWIN MIKROSYSTEM CORP.
MD09UE01-1910
6.1 Parameters
This section provides descriptions of parameter definition, parameter list and parameter setting.
6.1.1 Parameter definition
The parameters of E1 series servo drive are divided into two categories.
Table6.1.1.1
Category Description
Setup parameter Parameter for basic setting
Tuning parameter Parameter for servo tuning
For how to set setup parameters and tuning parameters, please refer to below.
 Setting setup parameters
Setup parameters can be set via the servo drive panel or Thunder.
Figure6.1.1.1 Configuration Wizard in Thunder

It is suggested to set setup parameters via Thunder. Users can follow the instructions
given by Configuration Wizard in Thunder to set control mode
, I/O signals and
parameters for trial operation. Configuration Wizard in Thunder is shown in figure
6.1.1.1.

Hiwin E1 Series Specifications

General

Brand	Hiwin
Model	E1 Series
Category	Servo Drives
Language	English