Name: Suzuki Intruder VZ800
Brand: Suzuki
Rating: 4 (1 reviews)

To Next Page

To Previous Page

SHAFT DRIVE 4-25

FINAL GEAR CASE INSTALLATION

Installation is in the reverse order of removal.

NOTE:

Refer to the following pages for the details of each step.

• Install the final gear case.

• Tighten the final gear case bolts to the specified torque.

 Final gear case nut: 40 N·m (4.0 kgf-m, 29.0 lb-ft)

• Install the rear wheel. (8-37)

• Pour final gear oil. (2-19)

SAMPLE

Questions and Answers:

Need help?

Do you have a question about the Suzuki Intruder VZ800 and is the answer not in the manual?

Suzuki Intruder VZ800 Specifications

General

Engine Type	4-stroke, liquid-cooled, DOHC, 45-degree V-twin
Displacement	805 cc
Bore x Stroke	83.0 mm x 74.4 mm
Compression Ratio	9.4:1
Fuel System	Fuel injection
Ignition	Electronic ignition (transistorized)
Transmission	5-speed constant mesh
Final Drive	Shaft drive
Front Suspension	Telescopic, coil spring, oil damped
Rear Suspension	Link type, coil spring, oil damped
Rear Brake	Drum brake
Seat Height	700 mm (27.6 in)
Front Brake	Disc brake
Rear Tire	170/80-15M/C 77H, tube type
Fuel Tank Capacity	15.5 L (4.1 US gallons)