3. Open the ream of paper with the seam side facing up.
4. Before loading paper into the tray, fan the sheets of paper.
5. Load and align the edge of the paper against the left edge of the tray.
Note: You can load paper in the Long Edge Feed (LEF) portrait orientation or the Short Edge Feed (SEF)
landscape orientation.
6. To adjust the paper guides, press in the guide release and move the edge guide carefully until it touches the
edge of the paper in the tray.
Note: Do not load paper above the Max line on the rear edge guide.
7. Gently push in the tray until it stops.
If enabled by your system administrator, the Paper Tray settings screen appears on the touch screen.
8. If you made changes to the paper tray, touch CChhaannggee SSeettttiinnggss, then correct the information. If you did not
make any changes, proceed to the next step.
a. For Paper Type / Paper Weight, Paper Size, and Paper Color, select options as needed.
b. If necessary, make changes to the paper curl and alignment adjustment options.
Note: For detailed information on the paper curl and alignment adjustment options, refer to the Xerox®
®
PrimeLink®
®
B9100/B9110/B9125/B9136 Copier/Printer System Administrator Guide.
c. Touch SSaavvee on each screen until you return to the tray settings window.
9. Touch CCoonnffiirrmm.
LOADING TAB STOCK IN TRAYS 3 AND 4
1. Select the appropriate paper for your print job.
2. Pull out the tray slowly until it stops.
3. Before loading the tab stock into the tray, fan the tab stock.
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide 181
Paper and Media
To Next Page
Loading...
Need help?
General