Loading Media in the High Capacity Feeder
1. Select the appropriate paper for your print job.
2. Pull out the tray slowly until it stops.
3. To change the paper size, perform the followings steps:
a. Remove any paper that is loaded in the tray.
b. To move the paper guides, loosen the two screws.
c. Adjust the paper guides to fit the new paper size, then retighten the two screws.
4. Open the ream of paper with the seam side facing up.
5. Before you load paper into the tray, fan the sheets of paper.
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide 297
High Capacity Feeder
To Next Page
Loading...
Need help?
General