To change the Energy Saver settings, refer to the User Guide at www.xerox.com/office/PLB91XXdocs. For further
assistance, contact your System Administrator or refer to the System Administrator Guide.
To enable Auto Power Off mode, contact your System Administrator. For more information, refer to the System
Administrator Guide at www.xerox.com/office/PLB91XXdocs.
This device is ENERGY STAR
®
-qualified under the ENERGY STAR Program Requirements for Imaging Equipment. The
transition time from Ready mode to Low-Power mode can be set up to 60 minutes. The default value is 15 minutes.
The transition time from Low-Power mode to Sleep mode can be set up to 60 minutes. The default value is set at
45 minutes. The total transition time from Ready mode to Sleep mode can take up to 60 minutes.
To change the Power Saver settings, or enable Auto Standby capability, contact your System Administrator, or refer
to Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer System Administrator Guide at www.xerox.com/
office/PLB91XXdocs.
Note: Changing the default Power Saver activation times can result in an overall higher energy consumption
of the device. Before you turn off Power Saver mode or set a long activation time, consider the increase in
device power consumption.
EPEAT
This device is registered in the EPEAT directory for meeting the ecolabel properties. Included is the factory defaulted
Sleep mode enablement. In Sleep mode the printer uses less than 1 Watt of power.
To learn more about Xerox participation in sustainability initiatives, go to www.xerox.com/about-xerox/
environment/enus.html or www.xerox.co.uk/about-xerox/environment/engb.html.
Environmental Benefits of Duplex Printing
Most Xerox
®
products have duplex printing, also known as 2-sided printing, capability. This enables you to print on
both sides of the paper automatically, and therefore helps to reduce the use of valuable resources by reducing your
paper consumption. The Lot 4 Imaging Equipment agreement requires that on models greater than or equal to 40
ppm color or greater than or equal to 45 ppm monochrome the duplex function has been auto enabled, during the
setup and driver installation. Some Xerox
®
models below these speed bands may also be enabled with 2-sided
printing settings defaulted on at the time of install. Continuing to use the duplex function will reduce the
environmental impact of your work. However, should you require simplex/1-sided printing, you may change the
print settings in the print driver.
Paper Types
This product can be used to print on both recycled and virgin paper, approved to an environmental stewardship
scheme, which complies with EN12281 or a similar quality standard. Lighter weight paper (60 g/m²), which contains
less raw material and thus save resources per print, may be used in certain applications. We encourage you to check
if this is suitable for your printing needs.
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide 263
Regulatory Information
To Next Page
Loading...
Need help?
General