Finisher Output Trays
1. Top tray
2. Stacker tray
3. Booklet tray*
*Available only with the PR Booklet Maker Finisher
Top Tray
The top tray has the following capabilities:
• Receives printed output and sample sheets
• Capacity of 500 sheets measuring 330 x 488 mm (13 x 19.2 in.)
• Collects all sheets that are automatically ejected before and after a jam
• Receives all media types and sizes produced by the system
If output sheets are not ejected completely, the printer detects a Paper Full condition. If this condition is detected
frequently, change the angle of the top tray.
To change the top tray angle, refer to the following guidelines:
• For normal usage, keep the tray in the lower, default position.
Important: Continual usage of the tray in the upper position can cause paper jams or output sheets
to fall from the tray upon delivery.
• When using the following paper types, change the angle of the tray to the upper position. The following paper
types can cause frequent Paper Full conditions:
– Lightweight, 106 g/m
2
or lighter, coated paper
– Coated paper whose edges are 364 mm (14.3 in.) or longer
– Long paper
Note: If sheets are curled, changing the tray angle has no effect.
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide 419
Production Ready Finishers
To Next Page
Loading...
Need help?
General