LLooaaddiinngg EEnnvveellooppeess iinn TTrraayy 55 iinn tthhee SSEEFF DDiirreeccttiioonn
When you load envelopes in the SEF direction, ensure that the flaps are closed and face down, and position the
flaps along the front of the tray.
LLooaaddiinngg EEnnvveellooppeess iinn TTrraayy 55 iinn tthhee LLEEFF DDiirreeccttiioonn
When you load the envelopes in the LEF direction, ensure that the flaps are closed and face down, and position the
flaps along the right of the tray.
Loading Tab Stock in the OHCF (1 or 2 Trays)
Note: If the optional GBC
®
AdvancedPunch
™
Pro is attached to your device, for instructions on loading tab
stock in the trays, refer to the GBC AdvancedPunch Customer Documentation.
1. Select the appropriate paper stock for your print job.
2. Pull out the tray slowly until it stops.
3. Before you load the tab stock into the tray, fan the tab stock.
4. Load and align the edges of the tab stock against the right edge of the tray in the LEF (long-edge feed)
direction, as shown:
5. To adjust the paper guides, press in the guide release, then carefully move the edge guide until it touches the
edges of the paper stock in the tray.
Do not load paper stock above the MAX line on the rear edge guide.
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide 317
Oversized High Capacity Feeder
To Next Page
Loading...
Need help?
General